• Members 557 posts
    April 9, 2023, 3:39 p.m.

    Someone on DPReview has asked me to post a table of lens formulas in object space and image space that I posted there a couple of years back. DPR has almost shut down, so I am posting it here instead:
    Screenshot 2023-04-09 at 16.34.13.png

    Screenshot 2023-04-09 at 16.34.13.png

    PNG, 185.7 KB, uploaded by TomAxford on April 9, 2023.

  • Members 21 posts
    April 14, 2023, 6:50 p.m.

    You can play with these visually at the PhotonsToPhotos Thick Lens Optical Bench
    For examplesnip.png

    snip.png

    PNG, 34.0 KB, uploaded by bclaff on April 14, 2023.

  • Members 30 posts
    April 17, 2023, 9:46 a.m.

    I find this formula very useful:
    D = f ( 2 + m + 1/m) + h
    f and m with the previous meaning
    D distance between object focal plane and sensor
    h = thick lens parameter, signed separation of principal planes

    D and m can be easily measured with a setup as below. For some old lenses f and h are well documented. For modern zoom and/or internal focus lenses, we have two unknown values, f and h, which are both functions of the m setting in general. For fixed zoom and m ( m by distance ) settings the two unknown values can be determined by doing 2 measurements with different extensions by inserting an extension ring or a bellows. focal_length_measurement.jpg

    focal_length_measurement.jpg

    JPG, 226.0 KB, uploaded by BernardDelley on April 17, 2023.

  • Members 21 posts
    April 17, 2023, 2:21 p.m.

    Yes. I prefer extension tubes because the extension is more exact.
    Using 3 extension tubes in combination get me 7 measurements which is more accurate than 2.
    There are several results of using this technique at PhotonsToPhotos.
    For example Focal Length at Closest Focus - 105mm f2.8G IF-ED AF-S VR Micro-Nikkor